Pressure Reducing Valve
Our pressure reducing valve is a hydraulically driven, pilot valve-controlled control valve. Automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a pre-determined limit. No matter how the flow rate or pressure before the valve fluctuates and changes， the valve can reduce the pre-valve high pressure to the post-valve low pressure and keep it stable, even if the valve does not have user water. It can keep the outlet pressure stable.

Surge Anticipation Valve

Float Control Valve
Modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed inside of reservoir.

AWWA C515 Resilient Gate Valve
AWWA C515 Resilient Seated Gate Valve AWWA C509 Resilient Seated Gate Valve CL125 / CL150 ▪ Online maintenance; If sealing parts in the bonnet are broken, we could replace the sealing parts with the valve completely open when the valve is still in the pipeline. ▪ Class A sealing (ZERO LEAKAGE) ▪ 100% testing before packing and delivery. ▪ Completely free and full bore self-cleaning & low-pressure loss. ▪ Clockwise closing (CWC) as standard, anticlockwise closing upon request. ▪ Operation: Manual handwheel, Square Cap, Extension Spindle. ▪ Bolts in Galvanized Carbon Steel, sealed with hot melt to prevent corrosion. ▪ O-ring bonnet gasket wraps each bolt to prevent corrosion. ▪ Linear sealing design provides better sealing & lower closing torque. ▪ WRAS approved for drinking water.

Gate Valve - Gland type
Resilient-Seated Gate Valve, Non-Rising Stem Gland type (IV002) * EN558-1 series 4 (DIN3202-F4, short length) * EN558-1 series 5 (DIN3202-F5, short length) * EN558-1 series 13 (BS5163, type-A / SABS 665) * ASME B16.10, CL125/CL150 Rating: PN10 / PN16 / PN25

Resilient Seated Gate Valve with Position Indicator

Resilient Seated Gate Valve With Top Flange

Mechanical joint, socket PVC pipe
This valve is design with socket end on both sides of the valve, sealed with NBR gasket in the socket, PVC pipe will be fastened by the extra flange of each side of the flange • Class A sealing (ZERO LEAKAGE) • 100% testing before packing and delivery. • Completely free and full bore self-cleaning & low-pressure loss. • Clockwise closing (CWC) as standard, anticlockwise closing upon request. • Operation: Manual handwheel, Square cap, Extension Spindle, Gearbox, Electric actuator • Bonnet bolts are in Galvanized Carbon Steel, and sealed with hot melt to prevent corrosion. Other materials upon request.

Socket for PVC pipe
this type resilient seated gate valve is designed with two sockets end for PVC pipe, each end of the valve with one NBR sealing gasket in the socket to make sure the valve have very good attach to the pvc pipe and also guarantee the sealing performance. Main features: - Huge convenience in daily water-using and repairing If sealing parts in the bonnet are broken, we could replace the sealing parts with the valve completely open when the valve is still in the pipeline. - Class A sealing (ZERO LEAKAGE) - 100% testing before packing and delivery.

Resilient Seated Gate Valve-Ⅱ
Ocean Resilient Seated Gate Valve, which is designed and manufactured for use in water, waste water, and sewage. Main usage is for isolation purposes. Full bore design makes it possible to be used bi-directionally and the fluid could clean the sealing surface area every time the valve is opened.  Main Features  ▪ Huge convenience in daily water-using and repairing  If sealing parts in the bonnet are broken, we could replace the sealing parts  with the valve completely open when the valve is still in the pipeline.

Spigot Smooth end

Rising Stem OS&Y Resilient Gate Valve
Rising Stem, Resilient Seated Gate Valve OS&Y (Outside Screw & Yoke) ▪ Huge convenience in daily water-using and repairing If sealing parts in the bonnet are broken, we could replace the sealing parts ▪ Class A sealing (ZERO LEAKAGE) ▪ 100% testing before packing and delivery. ▪ Completely free and full bore self-cleaning & low-pressure loss. ▪ Clockwise closing (CWC) as standard, anticlockwise closing upon request.