Mechanical joint, socket PVC pipe
This valve is design with socket end on both sides of the valve, sealed with NBR gasket in the socket, PVC pipe will be fastened by the extra flange of each side of the flange • Class A sealing (ZERO LEAKAGE) • 100% testing before packing and delivery. • Completely free and full bore self-cleaning & low-pressure loss. • Clockwise closing (CWC) as standard, anticlockwise closing upon request. • Operation: Manual handwheel, Square cap, Extension Spindle, Gearbox, Electric actuator • Bonnet bolts are in Galvanized Carbon Steel, and sealed with hot melt to prevent corrosion. Other materials upon request.

Socket for PVC pipe
this type resilient seated gate valve is designed with two sockets end for PVC pipe, each end of the valve with one NBR sealing gasket in the socket to make sure the valve have very good attach to the pvc pipe and also guarantee the sealing performance. Main features: - Huge convenience in daily water-using and repairing If sealing parts in the bonnet are broken, we could replace the sealing parts with the valve completely open when the valve is still in the pipeline. - Class A sealing (ZERO LEAKAGE) - 100% testing before packing and delivery.

Resilient Seated Gate Valve-Ⅱ
Ocean Resilient Seated Gate Valve, which is designed and manufactured for use in water, waste water, and sewage. Main usage is for isolation purposes. Full bore design makes it possible to be used bi-directionally and the fluid could clean the sealing surface area every time the valve is opened.  Main Features  ▪ Huge convenience in daily water-using and repairing  If sealing parts in the bonnet are broken, we could replace the sealing parts  with the valve completely open when the valve is still in the pipeline.

Spigot Smooth end

Rising Stem OS&Y Resilient Gate Valve
Rising Stem, Resilient Seated Gate Valve OS&Y (Outside Screw & Yoke) ▪ Huge convenience in daily water-using and repairing If sealing parts in the bonnet are broken, we could replace the sealing parts ▪ Class A sealing (ZERO LEAKAGE) ▪ 100% testing before packing and delivery. ▪ Completely free and full bore self-cleaning & low-pressure loss. ▪ Clockwise closing (CWC) as standard, anticlockwise closing upon request.

Gate Valve with Brass nut
Resilient-Seated Gate Valve Non-Rising Stem, brass nut type (IV001) * EN558-1 series 4 (DIN3202-F4, short length) * EN558-1 series 5 (DIN3202-F5, short length) * EN558-1 series 13 (BS5163, type-A / SABS 665) * ASME B16.10, CL125/CL150 Rating: PN10 / PN16 / PN25

Threaded Gate Valve
low pressure drop and 100% watertight, low torque. size range: DN20, DN25, DN32, DN40, DN50 wedge core: brass for DN20-32, DI for DN40-50 • Threaded connection, BSPP, BSPT, NPT • 100% sealing test. • 100% tightness. • Bi-directional flow. • Low pressure drop. • Detachable in load. • Screws protected against external dirts. • WRAS approved for potable water upon request. ▪ Hydraulic tests according to EN-12266-1, Class A ▪ Designed to EN1074-2 ▪ BSP threads to EN10226/1 or EN ISO 228-1 G thread ▪ NPT threads upon request ▪ barestem ▪ Square cap ▪ Handwheel ▪ extension spindle ▪ T-key

Coupling For Ductile Iron Pipe
Mainly for the convenience of connection, installation and maintenance.

Quick Flange Adaptor
It is a joint tool that can quickly seal the connection.

Universal Coupling
Also known as universal joint, it is a joint that connects two rigid rods. The joint consists of a pair of ordinary hinges with a relative orientation of 90°, so that the rigid rod can be turned in any direction. It is still widely used in the transmission of vehicles.

Twin Sphere Rubber Joint Union Type

Dismantling Joint
The detachable joint is suitable for pipelines where both sides are connected with flanges. The installation is to adjust the installation length between the two ends of the product and the flange, and tighten the gland bolts diagonally and evenly to make it into a whole.